First, you will need to remove the bezel of your screen and the video cable from the back of the LCD. These cables are usually attached with a thin adhesive and can be removed with a pin or by using insulating tape. If you can’t remove them with a pin, you can use a piece of Nitto-tape. It will take just a little force to get them out. Then, carefully remove the broken screen from the laptop and install the new one.
To remove the screen from the plastic bezel, first unscrew all of the screws. Then, pull the bezel away from the screen using light to moderate force. There are three to six screw covers to remove. Some of these screw covers are special and require special screwdrivers or allen wrenches. The screws are usually on the bottom of the plastic frame. If the screws are still attached, carefully pull them out using the smallest screwdriver or the allen wrenches.
To replace the LCD, first remove the resistive touch panel. It is separate from the LCD driver circuit. Discard the old LCD. Lay a piece of paper towel over the keyboard. Next, insert the new screen and secure it with two small screws or a flat screwdriver. Next, remove the glue holding the circuit board to the panel. You can now slide the new screen in and secure it with three screws on the sides and top of the panel.
If the screen is removable, you can repair it yourself with some care. Before beginning, make sure the computer is turned off and you remove the battery. If the battery isn’t removable, you might have to remove the computer. If this process doesn’t work, you will likely have to purchase an additional laptop or repair kit. If you are unsure, you can purchase a laptop repair kit that includes tools. The small screwdriver will come in handy for removing the broken screen.
Before attempting a screen replacement, you should carefully check your laptop. It may have a dead graphics card or physical damage from a drop. Make sure you check everything for damage before repairing the screen. The repair cost should be less than 50% of your laptop’s original purchase price. If the damage is beyond this amount, it may not be worth it to repair your laptop. Once you find out whether it’s worth the expense, you can decide if you should continue using the device.
If your screen is damaged, you may be able to replace it yourself. Before you start replacing the screen, you should first unplug the battery and unplug the laptop from the wall. If the battery is still installed, make sure you put it safely in a protective case. In order to remove the screen, you can remove the rubber screen screws coverings. You can use a screwdriver or a safety pin to pry these covers off.
Other than replacing the screen, you can also perform a resetting of the BIOS. To do this, simply turn off the laptop and remove the battery and power adaptor. Press the power button long enough to access the BIOS and deplete the CMOS battery settings. If you have an LED-backlit laptop, this step may be enough to fix the problem. If it’s a non-repairable screen, it may be time to replace it.
Whether you break the screen through an attack, a dropdown, or some other issue, repairing it can be a viable option for you. If you have the skills and confidence, you can try to fix the screen yourself, but be careful – you could actually damage the laptop more or lose the warranty. Then, it would be wiser to take your laptop to a professional repair shop instead. These laptop screens are quite delicate, so be sure to do your research before trying anything.
Check this out: quality laptop repair service overland park
A new screen can cost as little as Rs. 500, depending on your location. Laptop screen repair is relatively inexpensive if you can replace the entire screen. If you are confident in your abilities, it’s possible to save a lot of money by repairing the screen yourself. Otherwise, you may have to pay for a service charge, which can be quite high. If you are confident enough, however, you can save some money by replacing the screen yourself.